Standing seam metal roofing panels are attached with concealed fasteners. Standing Seam panels should be installed hemming edges, rakes and valleys to prevent using exposed screws and avoid all maintenance. Panels are attached to the roof deck with pancake head fasteners. Equally well-suited for commercial and residential applications, Standing Seam is always an excellent choice and if correclty installed, it is the only "Life-time roofing system"!
We strive to save you both time and money by combining roofing knowledge, the highest quality parts and equipment, and dedication to delivering exceptional service. We will not leave the job until it is finished and you are satisfied with the results.
We provide a full consultation to explain your available options so that you can choose the roofing plan that’s right for your home or business. We will work with you and adhere to your personal needs, and then we'll be in contact through the whole project.
Standing Seam panels come in 16" wide and 26 or 24 ga.
Panels comes are available in approximate 20 different colors. Paint warranty is 40 yrs., and it is a "concealed" screw panel (No exposed screws) that makes standing seam one of the best options for roof panels.
Life expectancy of Standing Seam panels is approx., 100 years with no maintenance needed if installed properly.
We own a machine to roll Standing seam panel onsite, no hassle with take offs or short panels. We can make panels as long as needed with no leaky joints.
Remember; Standing Seam Metal installation makes the difference between us and the competitors, if you don't install Standing Seam properly, you may waste your money with a wrong installation if they put hundreds of screws instead of hem it.
Corrugated C-panels is really common on residential applications.
We can install C-panels as long as 40' long with no joints.
It comes in 26 and 24 ga. and it also comes on 12 colors with 40 yr. warranty.
We also offer Corten panels (cold rolled), that give you the rusted look.
Corrugated panels are a "exposed screw system" with a life expectancy of 60-70 years.
PBR panels are very popular on residential and commercial applications for roof and siding panels. We can install PBR panels as long as 40'.
PBR comes on 26 ga. and approximate 15 colors available. PBR is an "exposed screw panels system", the only maintenance you need to do, is every 7 to 10 years re-set screws if applied over wood decking.
Life expectancy of PBR panels is also 60 to 70 years and color warranty is 40 yr.
Please contact us if you cannot find an answer to your question.
Most of the metal roof systems are life-time roofs.
Some of them do need a little maintenance every 7 to 10 years and some of them like the Standing Seam are "Maintenance free."
No, sound levels will not increment having a metal roof because insulation, drywall and wood decking help to decrease sound level.
The only way you can hear a high-level noise, is when metal is installed over a metal structure with no ceiling and insulation.
All metal colors have the Energy Star. Meaning that they have the highest reflectivity in the market, even more that asphalt shingles and white elastomeric coatings.
Standing Seam roof systems are considered a "Life-time roofing system" when properly installed. Labor involved, tools and machines used for installation makes this panels a high-end but also the best and safest system against leaks and snow penetration issues.
When panels are installed over a wood decking, you my need to re-set screws every 7 to 10 years. Usually screws have a rubber washer to prevent any water penetration.
On a Standing Seam panel system, the minimum slope we can install is 1/2" over every 12" inches of slope and 2" over every 12" pitch on an exposed screw system.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.